For MDPP-32 the following software is available: SCP = Signal Processing of Standard Charge Integrating Preamplifiers Outputs: Amplitude 64k, Timing 64k channels with min 24ps QDC = Signal Processing of fast PMT signals, Pulse Shape Discrimination, timing Outputs: Amplitude Short 64k, Amplitude Long 64k, Timing 64k channels with min 24ps PADC = Peak sensing and timing for shaped pulses. Self triggered or external, up to 32k resolution. Revisions: SCP = V2003: updated BLR 7xIrq-trigger, FMBLT waitstate: 0x6006 = 0 SCP = V2005: BLR range extended to +-12% for noisy signals Buffer extended to 32k x 32bit SCP = V2006: IRQ-trigger fix SCP = V2008: VME64x Slot address when setting coder to 0xFFFF Revised VME-interface timing (Dread, BLT,MBLT) SCP = V2009: Trigger output fixed QDC = V3003 7xIrq-trigger, FMBLT waitstate: 0x6006 = 0 Extended short (128) / long(512) integration 0x6046 sets resolution 65k...4k (set val 0...4) QDC = V3004 Buffer increased to 48k x 32bits (10k before) QDC = V3005 IRQ-trigger fix QDC = V3007 fix BLR jumps, VME64x Slot address when setting coder to 0xFFFF, Revised VME-interface timing (Dread, BLT,MBLT) fix noisy channels at high temp (ADC interface) QDC = V3009 Trigger output fixed PADC = V4004: 7xIrq-trigger, FMBLT waitstate: 0x6006 = 0 PADC = V4005: IRQ-trigger fix PADC = V4006: VME64x Slot address when setting coder to 0xFFFF Revised VME-interface timing (Dread, BLT,MBLT) PADC = V4007: Trigger output fixed package 0012 for MDPP-32 contains the following software: Area 0: SCP = V2009: Area 1: QDC = V3009 Area 2: PADC = V4007 package 0011 for MDPP-32 contains the following software: Area 0: SCP = V2008: Area 1: QDC = V3007 Area 2: PADC = V4006 package 0009 for MDPP-32 contains the following software: Area 0: SCP = V2006: Area 1: QDC = V3005 Area 2: PADC = V4005 package 0005 for MDPP-32 contains the following software: Area 0: SCP = V2003: Area 1: QDC = V3003 Area 2: PADC = V4003